
Add to Cart
RSJFS-V Partial Discharge Test Equipment -20~80dB Measuring Range
Product Introduction
The high frequency partial discharge patrol instrument adopts the high frequency current and the ultrasonic wave two kinds of detection methods according to the characteristics of live patrol, its size is small, the performance is excellent, easy to operate. Can be measured for cables, transformers (reactors) and other grounding wires. The system adopts modern electronic and computer integrated technology to realize signal amplification (analog, electronic, digital), filtering, data acquisition, data processing, graphics display, test report automatic generation, so as to complete the measurement and analysis of partial discharge.
Technical Parameters
The Host Parameter | ||
Number of Detectable Channels | 2 | |
The Sampling Accuracy | 12bit | |
Triggered | Internal synchronization, external synchronization | |
HFCT Parameter | ||
Detection Bandwidth | 100K-50MHz | |
Transfer Impedance | >5mV/mA(10MHz ) | |
Output Impedance | 50Ω | |
Detection Sensitivity | 5pC | |
Measuring Range | -20~80dB | |
Measurement Error | ±1dB | |
Resolution Ratio | 1dB | |
Output Interface | Standard BNC | |
US Parameter | ||
Frequency Range | 20kHz-300kHz | |
Output Impedance | 50Ω | |
Detection Sensitivity | 0.1mV | |
Measuring Range | 0.1mV~1V | |
Output Interface | Standard BNC | |
Hardware | ||
Display | 4.3” TFT LCD | |
Resolution Ratio | 480×272 | |
Operation | Membrane key | |
Storage | SD card is equipped with 16g card as standard, with the maximum support of 32g | |
Power Supply | ||
Internal power supply | Battery powered (16.8v lithium battery) | |
Normal working hours | About 7 hours, full time about 5 hours | |
Size | ||
Length × width × height | 235mm×133mm×48mm | |
Weight | 0.85kg | |
Environmenta | ||
Operating ambient temperature | -20℃ to 50℃ | |
Storage ambient temperature | -40℃~70℃ | |
Humidity | 10%-90% | |
Altitude | ≤3000m |