RSRS-V can test the transformer capacity, type, no-load current, no-load loss, short circuit (load) loss, resistance voltage, etc. It is small in volume, light in weight, in high accuracy, with steady property, easy to operation can replace the traditional testers. It is displayed by LCD, operated by menu, with friendly interface, is the first choice for all customers.

Product Features

1. Measure the transformer no-load current, no-load loss; short-circuit voltage, short circuit (load) loss, capacity.
2. Test methods: three-table.
3. The device can auto check if the wire was correctly connected, and display the vector diagram of three phase current, voltage when test the three phase transformer.
4. Single machine can make the loading test for substation transformer under 1600KVA.
5. All the related test results are automatically corrected.
6. 320x240 LCD, friendly man-machine interface, brilliance control, adapts to all seasons.
7. With electronic clock, auto record the data, time, it is good for saving and managing the test results.
8. Panel type printer can print the test results on site.

Technical parameters

1. Service conditions
Temperature	-5°C~40°C
Humidity	<95%(25°C)
Altitude	<2500m
Outside interference	no exceptionally strong vibration, no extra - strong electromagnetic fields.
Power supply	220VAC±10%,45Hz~55Hz.
2. Main technical parameters
Active parts:
Current output		0 ~ 10A
Voltage measurement		0 ~ 10V
Test Capacity		10KV oil-immersed, dry-type transformers: 30KVA ~ 2500KVA
		35KV oil-immersed transformers: 50KVA ~ 31500KVA
		20KV dry type transformers: 50KVA ~ 2500KVA
		35KV dry type transformers: 50KVA ~ 2000KVA
Features parts:
Voltage		0~450V (phase voltage), 0 ~ 800V (line voltage), auto-switch the measurement range
Current		0 ~ 100A, auto-switch the measurement range
Frequency		45Hz ~ 65Hz
3. Test accuracy
Voltage		20 ~ 100V, ± 0.2% FS; 100 ~ 450V, ± 0.2%
Current		0.5 ~ 10A, ± 0.2% FS; 10 ~ 100A, ± 0.2%
Power		± 0.5% (CosΦ> 0.1), ± 1.0% (0.02 <CosΦ <0.1)
4. Dielectric strength		The insulation resistance between voltage, current input terminal and the chassis≥100MΩ.
		Between power supply input terminal and the shell can withstand 2KV (rms), for 1 minute
5. Dimension		400×300×170mm
6. Weight		6kg (not including test lines)